Questions & Answers for: Delphi xts ups Computers & Internet

...XTs. On the oldest one I had to push menu more than once. Good luck! Although I do not own an XM Boombox and did not have this exact same issue, I did have the same FM Frequency problem when hooking ...

My SkyFi R 1.18 does the same thing but the solution here doesn't When i start up my SkyFi 3, it only gets as far as the "Detecting SD Card." Even with a card in the receiver, it still does not detect

My unit starts up and just says at top "Checking Media" can not use any buttons, just frozen! Take the sd card out, reboot by holding volume up and menu at the same time for 5 secs, wait for it to ...

i am getting a checking media message repeatedly. i did a soft reset by holding up volume and mode key. then a hard reset by touching up arrow then down arrow immedaitely after soft reset. unit still ...

my unit will not power on either on the dock or with the power cable plugged straight in and I know that my electrical outlet works mine has some funny problems including this one. However when I do ...

My xm radio is all lit up it shows all of the information but you can't change channels get into the menu or any other functions it is like it is locked up. any suggestions Hold down "power" and ...

powers up but locks up on "detectin sd card" screen My skyfi 3 powers up but will not get past the "Detecting SD Card" screen. This has happened several times but issue would resolve itself if I let ...

how do I use a new MicroSD? Unit locks up when Checking Media First of all, suggest using an SD card of 2GB or under. Second, firmware update. Here's the details: This is a common problem with SkyFi3 ...

Problem with the Delphi SKYFi3 XM Radio Receiver UNIT LOCKED UP WILL NOT COME ON OR GO OFF Common problem with SkyFi3 units. You have to press the Volume UP button and hold it while you press the ...

I have repeatedly used the standard reboot for Skyfi3 and it will not work. There is supposed to be another high reboot that can be done.. Does anyone know it? Tyhe unit will not get out of scanning ...