Questions & Answers for: Deadbolt weiser lock open Computers & Internet

Question about Kwikset 907 Smart Code Polish Brass Smartkey

1 Answer

how to change batteries on smart key The Weiser brand and Kwikset brand Powerbolt are identical (Black & Decker), so these instructions will work just fine for ...

Ad

Question about Kwikset 907 Smart Code Polish Brass Smartkey

1 Answer

...if will unlock the lock. The code is not required to enter. What do I do to fix this problem? With the door open so u dont get locked out,did u remove the batterys and try to re-set your door code

Ad

Question about Weiser Powerbolt 1000 Keyless Touchpad + Knob

1 Answer

how do you wemove the cover to replace the batteries and how do yu set the code? This is an old unit I bougth in 1996 and never installed it untel the outer day. T/Y Here is a link to the Frequently ...

Question about Zurich Digital Keyless Remote Control Lock Brass-WITH REMOTE

1 Answer

...LOCK LS-DBS" and click on Download. This will download a PDF file of the installation and programming instructions. If you cannot open and view the download, you will need to download and install ...

Question about Weiser Powerbolt 1000 Keyless Touchpad + Knob

1 Answer

...lock's symptoms beyond it worked great, then stopped. Here is the link to the troubleshooting instructions. The Weiser brand and Kwikset brand Powerbolt are identical (Black & Decker), so ...

Question about ELECTRONIC DEADBOLT KEYLESS ENTRY DOOR LOCK

1 Answer

...Weiser Powerbolt lock has the Program button either on the top left or lower right hand side of the board (depending on the way the door opens) under the cover. Press the Program button once and then ...

Question about Weiser Powerbolt 1000 Keyless Touchpad + Knob

1 Answer

unlocking the door When I unlock the door the latch doesn't go all the way into the door, leaving the latch sticking out a bit. Same issue. But I have Garrison instead.

Question about Weiser Powerbolt 1000 Keyless Touchpad + Knob

1 Answer

open You have to move the lock covering the big hole back toward hinge side by loosing screws and moving to the side till the deadbolt moves back all the way flush. Some deadbolts have a little indent

Question about Weiser Powerbolt 1000 Keyless Touchpad + Knob

1 Answer

...in the open position" dead bolt locks normally have a second small tongue above the main one when it is in the out or locked position push that small bit back in then the lock will function ...

...weiser deadbolt lock. There are no screws in the cover. Do I just pull it? Up? Straight out? This is the old style lock, not the one with the screen. There are no screws in the cover. try straight up ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...