Questions & Answers for: Celestron target repeat Computers & Internet

...that after alignment the scope slews either vertically up or down before I have selected any target. I have to switch it off before the scope hits the mount. Any ideas ?? A low voltage power ...

...does not. When the later occurs, the only thing that helps is to repeat the alignment picking new targets. One night, I had to repeat alignment 3-4 times. Also, I highly recommend a book by Michael ...

...Practice focusing on a distant object during the day time. At night the moon show be your first target. Sky objects are very small, many are also very dim. The scope has to be pointed directly at ...

how to use the celestron 114 az telescope Celestron has all of their manuals on their web site: www.celestron.com Read my TIPS on my profile page, several of them will help you. The moon and Saturn ...

...during the day time. If this works your telescope is OK. Then try the moon at night as your first target. If you can see the moon up close all is OK. Read my TIPS on my profile

telescope eyepiece. Then without moving the telescope align the small finderscope on the exact same target

...object using the eyepiece with the largest number written on it. The moon should be your first target at

...the eyepiece with the largest number written on it into the focuser. The moon should be your first target at night. the RA knob and the DEC knobs (slow motion controls) are used to keep the object ...

The image through my Celestron Astromaster 114EQ is at an angle, ie SW/NE orientation. Can this be fixed by collimating the telescope? The image I see on terrestrial targets is at an angle (SW/NE ...

Cannot align Finderscope to target object Cannot align the finderscope to correspond with the view I am seeing through eyepiece of scope. Adjusting the two side screws takes my view through the ...