Questions & Answers for: Fargo stuck on spooling Home

The card stucks My Fargo Pro-lx prints ok, but when the card arrives to laminating fase, the card stucks and the printer send an error message. I did check the temperature by the software and increase

cards My cards are getting stuck in the middle of the rollers. Hi, try to clean rollers with cloth dumped with alcohol,then use dry cloth again to clean rollers.Also clean sensors.Then go to menu and ...

dtc300 is stuck in "replace ribbon" mode n there's nothing wrong with it. is stuck in "replace ribbon" mode n there's nothing wrong with it. are you using a ribbon made for the dtc300? there are some ...

ribbon keeps breaking - cards get stuck, or cards come out in funy colors try to run the diagnostic utility as instructed clean the printing path by fargo cleaning kit

screen reading wrong ribbon - had the same ribbon in it since the last printing. My DTC300 printer has the same problem. The ribbon supply roller is driven by a small motor connected via an O-ring ...

PVC HID 1000 cards were getting stuck/bent in the Lamination module of our DTC550 printer. Talked to the tech department where we bought the printer/lamination module. They suggest because we are ...

Stuck card in printer The printed card did not eject. Stuck in the printer and became very soft and pliable - Open the lid. -Lift the print head. -remove the ribbon. Now, on screen you will have the ...

...spool by hand to ensure that ribbon material is moving smoothly from the feed spool, and is not

fargo dtc 400 not printing screen says printing yellow????? There's really very limited info in your question for us to go on, but we would: update the drivers; update the firmware; and perform a ...

I have a fargo HPD 5000 and I am getting the error 91 stating the ribbon is out..i have changed and its still showing the same error. am I doing something wrong? Hi Camille - that is indeed the error ...