Questions & Answers for: string height adjustment Vacuums

...height adjustment string broke Is there any way this can be repaired? It is still attached on the body of the Roomba, but where it goes in the groove on the deck, that is where it is frayed. Is there ...

height adjustment lever will be on your right. Push the lever all the way down. Lift the light hood with your left hand. Turn theKirby vacuum belt lifter counter-clockwise with your right hand. Unlock

...may not be worth your time! Open the machine like your going to replace the belt. Check for any obstructions under the front wheel height assemblys.You may have some string around the wheels and

...Height String" The new battery is a bit heavier than the old ( by 10 ounces if you got the new battery) dis assemble the roomba and you will see a string attached to a screw which allows the brushes ...

...Height Adjustment" issue. It will probably work great on a hard surface but on carpet the brushes bog. If you've taken the unit apart already...Sorry....do it again. When you do, you'll see a String ...

...the brush turn easily? -- a few drops of oil on the bearings won't hurt.. Be sure to clean all the strings and threads and hair that gets wound around the brush, while you have it all in the open. ...

...string caught on the beater bar which I removed, but the beater bar still does'nt turn and the power button still flashes on and off. I hope you can give me a solution to this problem. I had the same ...

...the hoover! I have cleaned the filter but It was not like this before It may be something as simple as a string wrapped around the wheels. You might also check to see if it needs a height