Questions & Answers for: Fender string height adjustment Home

...height and distance where the string is supported. Don't adjust the bridge supports unless you loosen the strings. It is highly recommended that you don't make any adjustments yourself unless you are ...

height adjustment screw. It is clear, and only a bit on the tip of the toothpick should do the trick. Once it dries, it's like rubber, and should keep the adjustment screws from losening up. It is

...me why this is happening? You should have NO fret noise if the neck is properly adjusted for string height. If you are getting fret buzz take it into a gutar shop for adjustment. Google "fret

height needs adjusting in relation to the E string or is it the string buzzing against a fret - indicating a need for adjusting the bridge height or trussrod settings? One of the frets are buzzing. It

...string height up a little.  make small adjustments usually only one turn or half a turn at a time.  take care to note your adjustments so you can always go back to where you started.  ...

...string and the fret the right height should be that it just fits between without moving the string once you've done this you should be able to intonate but please inspect all your frets first for ...

string height along the neck. In addition, neck tilt (particularly easy to adjust on bolt-on necks) refers to the angle that the guitar neck exits the neck pocket on the guitar body. This also effects