Questions & Answers for: Intermatic smart digital timer Dishwashers

Question about Inc. ST01C Digital In-Wall Timer

1 Answer

...Digital In-Wall Timer is not compatible with a REGULAR three-way switch configuration... ((besides being a rather poor timer ( my opinion ))). Following WIRE colors is TOTALLY INCORRECT... (and ...

Ad

Question about Inc. ST01C Digital In-Wall Timer

1 Answer

...Smart Timer. When switched on, it continually turns on and off. I then have to switch it off. The box seems hot too. I wonder what could be going on. What is the load on that circuit? It may be ...

Ad

Question about Inc. ST01C Digital In-Wall Timer

1 Answer

...SMART TIMER BLINKING WHEN TURNED ON Sounds like you connected white wire incorrectly, or are trying to replace 3-way switch. GE 15071 and 15086 are for single-pole switch replacement only, and will ...

Question about Inc. ST01C Digital In-Wall Timer

1 Answer

...In-Wall Smart Digital Timer Model # 15071 blinking when turned on The timer is wired incorrectly. ON the GE timer and Utilitec timer: The red and black wires are reversed. On the Intermatic ...

Question about Inc. ST01C Digital In-Wall Timer

2 Answers

...smart digital timer (G.E.) or Jasco product for my front porch light. I hooked all the wires as instructed and programmed according to instructions. I have a two wire system, so i left the green wire ...

Question about Inc. ST01C Digital In-Wall Timer

1 Answer

...smart digital timer has been installed for over a year now and it just stopped working. the screen is blank. any ideas about what is going on with it The GE digital timers are powered by the electric ...

Question about Inc. ST01C Digital In-Wall Timer

1 Answer

...smart digital timer keeps flashing I need help to rewire this You posted under GE timer. Open following link to identify timer and see manual and written wiring instructions: Most in-wall timers are ...

Question about Inc. ST01C Digital In-Wall Timer

1 Answer

...Smart Digital Timer. After I programmed the timer and went to manually turn on the light the light started to click on and off and the timer ticked? Timer wiring instructions shown on following page: ...

Question about Inc. ST01C Digital In-Wall Timer

1 Answer

...smart timer can be set for on-at-dusk and off-at-programmed-time. BUT I am only reading the instruction manual for a new product, before people write the company and then the manual gets changed. ...

...Smart Digital Timer 15526. After I programmed the timer and went to manually turn on the light the light started to click on and off and the timer ticked? Wired ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...