Questions & Answers for: Abit set computer clock Cycling

...DDR SDRAM Bus Width 64-bit Real Clock 166 MHz (DDR) Effective Clock 331 MHz Bandwidth 2650 MB/s Chipset Bus Properties Bus Type VIA V-Link Bus Width 8-bit Real Clock 66 MHz (ODR) Effective Clock 530 ...

...Close the case & plug the power cord back in. Boot the PC. You will need to enter the bios to reset the clock settings & any other settings you may have made. Thats it. Mike Been doing this for a ...

...set 266, so the new cpu is no fully recognised. the mb is an abit va-10. how can i change the fsb Unless the mobo is compliant with a front side bus speed of 333mhz, the cpu you have will only run at ...

...usb ports whether the computer is on or off. I don't see any options in the bios to control it. try setting up your CMOS by setting it to optimized default settings, then save and exit. turn off your ...

...computer before so Im kind of stuck here. My guess is that the CPU is over clocked through jumpers on the motherboard but I'm not sure how to change those. Also the link to my motherboard's manual on ...

motherboard doesnt post if you change any of the settings I got an old abit KD7 from a friend, it boots up fine if default settings are loaded but if I change anyone of the the settings it will not ...

...set the clock and hoped all would be OK. Computer still requires me to press F1 to start up. Any ideas? Thanks in advance. David Munn. Yes! Re-install your Operating System (windows?). When all is ...

...Try to remove the cmos battery, and insert it again. This will reset the bios to factory defaults. You will need to setup the whole bios, date, clock, boot settings ...

...bucks. The batterys voltage is about 3 volts, when it looses it`s power, bios can`t remember it`s settings. Change the battery, and setup the bios clock, date, bootsettings, and you are running ...

...set the clock to the right time =oP So what am I missing ? runs fine with a 128MB & 256MB installed... it's just when I put a 512MB in Since it "runs fine with a 128 & 256", install those and go ...