Questions & Answers for: Dell Precision scsi controller

...SATA hard drive only! what kind of hard drive do i need in order to make it work? do i need the SCSI ULTRA U320 hard drive? Ok go to bios setup and then "load bios default" and press "F10" to

SCSI Cables Keep Coming Loose! The scsi and/or power cables keep coming loose. Is there any way to secure them? I use electrical tape for such things. Just wrap it around the cable and then tape it to

Dell 670 BIOS not installed When booting up, the logical drive cannot be found although the SCSI hard drive is installed and later stops booting with "BIOS not installed!" I tried booting with WinXP, ...

... message Hi, I just bought this Dell Precision 670, and after starting, it displays the hard drive: SCSI 73GB, but then renders "No logical drives found" and then "BIOS not installed!" I am unable to ...

...670 au demarage de l'installation le windows xp ne detecte aucun disque dur j'ai un disque dur 73 G SCSI j'arrive a configure sur le bios Aller sur le site Dell et telecharger les drivers SCSI ...

...You have two options with the WS670. You can use standard IDE (PATA) drives or you can use SCSI drives (up to Ultra320). If you are already using SCSI HDDs in the system, you would most ...

...controller and drive are not on the same channel. A lot of cards auto assign this but since the Dell has a 2003 date, its worth checking. 3. I've seen drives detected before but not usable. It had to ...

ide hdd not found bios set to auto detect .scsi off The hard disk is totally dead, replace it. If you get the same message with a new disk then the southbridge is faulty, you will need a new ...

...the data located on SCSI where it is mirrored in a RAID array which is a security measure. You need to install the driver of your scsi controller for win7/64. Then you'll see your datas on

...1. It seems that Dell states that you can only install up to 2 TB in SATA II? I have an embedded SCSI / SATA Host (Intel) with connections to SATA only. Can I install a SATA III PCi card and still ...