Questions & Answers for: Compaq scsi controller Computers & Internet

Installig Need some documentation on how to install the smart array 5i controller. Try this url ...

SCSI Controllers, (this prompt is at the bottom of the screen) Then follow the propmts to load from the disk you made earlier. you should be able to select the controller from a list. (short list) you

...and disable the scsi controller. Then, you need to re-boot before the bios can see the ide hard drive. Next, you configure the bios to boot from the cd/dvd drive first and the ide hard drive

...controller. Download the correct driver and save it to a floppy. When you boot from the XP install CD look for the prompt at the bottom of the blue setup screen that says "Press F6 if you need to ...

...SCSI-Fast, Wide or Ultra controller with the wrong type/technology drive or (gasp) Differential (used mostly for Tape, Robots, Jukeboxes and CD or DVD Arrays) The others won't work... Diff will smoke ...

Compaq Proliant ML570 G1 ( 0 logical Drives) I have Compaq proliant ML570 G1 server with integrated smart array controller. I have 4 hard disks the first one is RAID 0 and the The O/S is installed on ...

...SCSI Controller, and an IBM PCI to PCI controller. The Compaq Array Configuration Utility shows an array (RAID 0, 100GB) using IDs 0,1,2,3,4,5 for the 6 drives. I have all 6 green LEDs on the ...

...SCSI or IDE controller) driver is being loaded, or the driver was not written for Windows and is not compatible. Contact the device's manufacturer or download the latest driver for the mass-storage ...

...the following mass storage devices in your computer : <none> * To specify additional SCSI adapters, CD-ROM drives, or special disk controllers for use Windows XP, Inluding those for ...

i have a compaq evo w8000 desktop and want to install a sata drive instead of the built in scsi drive. I can install windows xp (i've got the sata card drivers and pressed F6 etc, that all works fine)