Questions & Answers for: Konica reset machine develop

I replace the developer ,did a counter reset and L-detect comes oo5-- 025 What model???? Did you run the procedures in the 36 mode????

I need to reboot a Konica Minolta 8050 printer copier with error code SC27-04 Hi... Error Code : SC27-4: Output of toner density sensor/K (TDS K) cannot be controlled. Unplug the power cord that ...

...power on. Get the trouble reset touch see ok turn machine off then back on AFTER TEN SECONDS!!!!!!! if it comes back do NOT DO attempt reset again the machine is trying to tell you there is a

Konica 7228 was getting dark copy with streaks. I cleaned all the parts around the drum out. Checked and cleaned the Main Corona. After I finished it got darker! I think it's a Main Corona grid bias ...

...the counters to determine voltages for certain parts inside the machine, reset counter and not replace the parts the copier thinks they are new when in fact they are old you get codes and bad

How to check developer setting konica ubix 1015 Legacy machine for sure. see if you can find a company that will have the image unit. Asking alot.

Konica c224 machine come out plain copy prt/ir p-5,p-6,p-7, p-21, p-28 is this display P-5 Clean the front IDC sensor located under the transfer belt which will have to be removed and you will need to

...service Replace the drum and developer unit and ensure that the counter for drum and developer is reset and that the F8 is run in service

my machine konica 164 it is problem m2 please solve this Replace the drum and developer

konica r2 large print then 381 The error code 381 on a Konica R2 Large Print device typically indicates a problem with the developer unit. The developer unit is responsible for adding toner to the ...