Questions & Answers for: Gestetner reset machine develop

copies are printing out light on the top half of page We have a Gestetner 3370, when copying the top half of page comes out light or very faint. Toner ok in machine. What can I do to either clean or ...

i have problem with installing NRG DSm645 & there setting a service guy is required for this machine. this machine has developer which needs to be installed and initialized (2-801)&(2-805)drum ...

i replaced devoleper when i apply 2-214 initial setting "ERROR" message on screen you must reset the pcu unit. make sure connections are correct. you put the correct developer in?

toner density issues and you should have a service technician (one who knows what they are doing) look at the machine, but most likely if you reset that lever the problem will go away. Hope that helps

my gestetner DSM735 keeps saying add toner. replaced toner and developer still saying add toner The first thing i can tell you is that is weird!!!! Because if you change the developer that error ...

...change the toner and hoped to reset the massage????????????? If the machine are telling you to change the developer unit you need to change the developer unit!!!!! Do that and your problem is ...

WHAT DO I DO WITH THE ERROR CODE SC405 on that machine check the development charge connect on the development unit or the the in side of the machine

how to solve code 390 in dsm 620 Plz change the developer machine working fine

how to fill developer on my Ricoh africo 2035e first open the front door then side door remove the drum unit than separate the top part of the drum unit and the development unit than pour the ...

copy comes out black not readable what machine is that? try to print something from the memory of the machine if its still blink then it can be from the laser or development unit