Questions & Answers for: replace stem Cars & Trucks

Question about 2007 FJ Cruiser

1 Answer

...the air coming out. Don't stand in front of it or you will smell like stale rubber air!!! lol Take a reading of your air pressure and when it's where it should be replace the stem cap. Good

Ad

...replace the core of the stem that will re seal it. if it only has a standard valve stem then a tire shop should have replaced them with the set of tires, the only way to replace them is to remove the ...

Ad

Question about 2003 Impala

1 Answer

...stem is leaking, replace the core, cheap... available at auto stores, also need special tool to remove stem( cheap). if all 4 are low, might be due to cold temps, tires loose i think 3 psi per 10 deg ...

...Replace the valve stem or have it replaced. There is a special tool to unscrew the valve stem. Remove the wheel and tire from the car and depress the pin in the stem to release the air in the tire. ...

...have tried replacing the stem. Still leaking, also can the valve stem on the high pressure side be replaced? Not without spending alot more money than you want, because you have to have a shop ...

Question about 2008 Rx 350

2 Answers

Tire monitor valve stem leaking ? What's the fix ? replacement is only solution. you better take it to tyre shop and get it replaced This particular valve stem is aluminum.It is sealed with a gasket ...

Question about 2008 Uplander

2 Answers

...in one tire. The valve stems are where the censors are located. To replace a stem would be to buy a new tire monitoring stem for a 2008 Chevy Uplander and newer. Anything older didn't have the

how do i replace valve stem seals on 1990 nissan pulsar GL To replace the seals in ANY cars valve stems you need to buy the valve core. They screw into the stem.

...stem off and drill it out? This is a job for the AC service mechanic. Once you replace the valve the whole Air conditioner system has to be put under vacuum before re-gassing and you need specialized ...

...that are over 40 years old. The inner valve can be unscrewed with a simple tool and replaced if necessary. I have removed and replace a valve stem on my scooter but I did that while changing the

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...