Questions & Answers for: Jeep replace stem Home

...valve stem broke off A nice gentleman offered to use his wrench to take off the last metal cap (I replaced the rest w/plastic for this reason) on my valve stem so that I could put air in the tire ...

Ad

I have had two sensored valve stems replaced on my 2005 Jeep Liberty Renegade and two more are split now. How is this happening? I have owned cars for years and never had problems with valve stems. Is

Ad

Question about 2005 Grand Cherokee

1 Answer

stem that the oil filter screws on to is loose or possibly broken how does one replace or fix it, could have caused my warning light to flash and tone to occur. It's just loose, inside of the" stem" -

Question about 2006 Grand Cherokee

1 Answer

...stem caps (metal). When I went to take them off to replace the tires, they were stuck and snapped off. Apparently, the valve stems for the auto-pressure monitoring units are alloy and not stainless ...

Question about 2001 Grand Cherokee

3 Answers

how do you brake the top nut on the front top shock you should have struts,not shocks. do you see three nuts around the big nut you asked about? if you're replacing the struts,you'll need to remove ...

rearend roar, bearings replaced, brakes grabbing. would it cause roar? iys in rear, i have torn off cv boot in front. someone suhgested cv stem? Wondering if brakes are responsible for roar in rearend

Question about Comanche 29er Mountain Bike

1 Answer

handlebars How do you raise the handlebars? unfortunately, your bike uses a threadless stem. meaning you cannot raise it, you must replace it with an adjustable one, or get a stem with a steeper angle

Question about 2005 Grand Cherokee Laredo

1 Answer

...the system and valves? The tire pressure monitors are made in the valve stems. You will have to replace the valve stems then have the codes cleared at the shop. Most tire stores have the tool to ...

Question about 2002 Grand Cherokee

2 Answers

replace them without taking off the head; but I wouldnt recomend it as the process is frought with DANGER!!! You need to follow a very strict process and be prepared to take the head off when you drop

great if it's the valve stem seals how do you know which side it is or you do them all Do you only buy one shoe if it is worn? replace all of them, unless you want to cheep changing them one at a time

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...