Questions & Answers for: Chevrolet replace stem Home

...Replace the parts, as necessary. Fig. Front shock absorber mounting-2WD vehicles To install: Fully extend the shock absorber stem, then push it up through thelower control arm and spring so that the ...

...UNFORTUNATELY THIS WAS A COMMON PROBLEM FOR THIS ENGINE. I WOULD REPLACE THE VALVE STEM SEAL FIRST BEFORE TEARING UP THE ENGINE LOOKING FOR ANOTHER TYPE OF PROBLEM, RINGS, PISTONS, ENGINE BLOCK,

...valve leaks. I installed new caps and this seemd to stop the freon leaks. are the stems hard to replace?1998 chevy pick up- 350 engine no its not. they just screw ...

...replace it, if necessary. To install: Fully extend the shock absorber stem, then push it up through the lower control arm and spring so that the upper stem passes through the mounting hole in the ...

...stem is leaking, replace the core, cheap... available at auto stores, also need special tool to remove stem( cheap). if all 4 are low, might be due to cold temps, tires loose i think 3 psi per 10 deg ...

...have tried replacing the stem. Still leaking, also can the valve stem on the high pressure side be replaced? Not without spending alot more money than you want, because you have to have a shop ...

low pressure valve stem is leaking on my 1995 chevy truck Low pressure valve stem? Do you mean on the A/C system? If so, just simply replace the shreadder valve.

My 1985 corvette smokes out the exaust only when at idle and engine at running temperature. most likely worn valve guides and probably dry cracked and fallen off valve stem seals you may get lucky ...

...in one tire. The valve stems are where the censors are located. To replace a stem would be to buy a new tire monitoring stem for a 2008 Chevy Uplander and newer. Anything older didn't have the

...off at lights)the burnt oil in the exhaust is expelled as a cloud of smoke . The fix here is to replace the valve stem seals that have gone hard/cracked and are no longer sealing on the valve ...