...replace stem in reverse order of takeing off. It's threaded and you use a stem removal tool to remove the old one. Make sure before installing the new stem, that you replace the seat in the manifold ...
I bought a replacement Danko faucet cartridge for an american standard bathroom sink and the package said hot/cold but when I installed it on the cold side the handle turns the wrong way. How do I ...
...shower stem replacement. I'm trying to identify where the friction ring is supposed to be placed. I've seen it in pictures going on the end where the bibb washer is, and I've also seen it in the ...
stem for a milwaukee faucet(part 4s-6h/c) it is leaking from the handle... do I need to replace the plastic part that runs back into the pipe? Is there an easy way to remove it? Sometimes on the stems
...shower faucet and now the spigot leaks a steady stream of water wrong stem.. the body of cartridge where the o ring seats into the body of the faucet needs to go all the way down.. try looking at new ...
...OVER THE MODEL # OF THE DELTA STEM IS RP24096 THAT IS THE PART #. CAN YOU PLEASE HELP order a moen replacement online from
shower is leaking when I turn the the hot or cold water off I replaced the hot and cold water knobs but it still leaks I didn't change the washers what is causing the problem replace the seats in ...
water comes out of the spout and shower head when I want to shower. This is after I replaced all the stems with new ones The gate or bypass put of the tub spout is not stopping all of the water from ...
...then you will need too look up-stream for blockage in the water lines. If it is better then replace or clean out the holes in the shower head. It may also have a filter screen before the shower
...faucet Remove knob Unscrew old stem Use flashlight to inspect seat for damage and corrosion. Dress or replace seat if necessary. Install new stem Reinstall knob Turn on water supply and check for ...
Usually answered in minutes!
51 Questions
42 Questions
7 Questions
