Questions & Answers for: HP replace carriage Computers & Internet

Carriage Jam error everytime I replace the refilled cartridges on my printer, The first try that i replaced the cartridges, it would only print black, so I took them out to get the color back and then

...carriage path for debris. If the belt is worn, replace the belt. Also, clean the teeth on the carriage drive motor, the debris from the belt will accumulate on the teeth. ....or 4. the trailing cable ...

...replace the appropriate parts. 1. Visually check for jammed media or other obstructions in the carriage path and remove any obstructions found (remove any loaded media as well). 2. Determine if the ...

replaced.If the arrow show right mark replace the black cartridge.If you replace both cartridges and problem still persist carriage unit or logic board assembly is failed and your printer need service

...carriage is stuck at the right hand side of the Printer and cannot be moved out to the center of the Print Platen it is because the Service Station cannot uncap the Printheads. In this case replace ...

...replace it.> Check carriage assm play..feel over play replace carriage bushings & lubricate it.> Check carriage stuck in service station?, find out the reason  shoot the

86-01 Error 86:01 still there. I replaced encoder strip twice, encoder sensor. Carriage PCB and Mech PCB. I'm out of options now. Maybe the scan ax motor, but during scan ax test the motor ...

...right door, check right side pulley of carriage belt, weather its cracked or dirt particles deposited on it, clean/replace it, lubricate carriage rail, fix back every thing check .. best of

...registers on the Carriage PCA was diagnosed and an error was detected. Remedy:• Replace the Carriage PCA. • Make sure that the Carriage Cable is correctly connected. • Replace the Main