Questions & Answers for: Canon replace carriage Computers & Internet

...i series and above) may cause the same symptom. Try to clean film encoder by wiping it with moistened clothe first. Remedial action: Replace carriage part Clean/replace film timing **** strip ...

... wipe slightly with moistened clothe. At last, if carriage part is faulty you need to replace it.Hope this will be helpful for you. Please don't forget to rate me. Regards, Source: Inkjet Printer ...

Model Cannon MX310 - replaced ink cartridge, both black and color. Window states, check ink - black and color. Will not work. Replaced with new cartridges again. Still will not work Is the carriage ...

...Replace the carriage shaft. Replace the deformed parts. Apply more grease. Cause: Bi-directional print displacement compensation failed because the carriage motor is out of step, or some similar ...

...the linear scale: Visually check the linear scale for abnormal conditions, such as stains or damage. 5. Replace the carriage unit. 6. Replace the head controller. 7. Replace the system

IP6700D SHOWING ERROR 5110 This is because Carriage lift mechanism error The carriage did not move up or down properly. Solutions: Foreign material or paper debris that obstructs the carriage movement

...Replace the cable between the carriage homeposition sensor and engine controller if the connection is not functioning normally. 4.Replace the linear scale. 5.Replace the linear encoder. 6.Replace the ...

...carriage relay PCB iand the main controller PCB is abnormal, replace the cable. 5.Replace the carriage relay PCB. 6.Replace the main controller PCB. ...

...replace the carriage motor and / or the main controller ) If the error occurs before the start of printing, the main controller is most likely faulty. The problem is reported to have occurred as a ...

...scale, and linear encoder if any. 2) Replace the carriage HP sensor. 3) Replace the linear scale. 4) Replace the linear encoder. 5) Replace the carriage relay PCB. 6) Replace the main controller