Questions & Answers for: Danco removing the stem Home

how does a 9s-4h/c danco stem install. the spring goes in first then the rubber seat goes on top.put them together first on a small screwdriver,insert on hole push down on rubber into hole it should ...

I bought a replacement Danko faucet cartridge for an american standard bathroom sink and the package said hot/cold but when I installed it on the cold side the handle turns the wrong way. How do I ...

how do i remove the faucet handles? I have removed the screws on the faucet just am not able to remove then to get to the stem. They make sockets for stems to break them loose from valve. It should ...

I bought a 3h-10h/c but it only works for hot. do you have the same product for the cold side? The same part works for both Hot & Cold sides. Usually preset to work on Hot (counter clockwise on, ...

I bought the Danco replacement stem for a milwaukee faucet(part 4s-6h/c) it is leaking from the handle... do I need to replace the plastic part that runs back into the pipe? Is there an easy way to ...

how to install a danco 10472 4z-24h/c hot & cold faucet stem how to install Shut off water supply Open faucet Remove knob Unscrew old stem Use flashlight to inspect seat for damage and corrosion. ...

...stem wrench set. After removing handle, place appropiate sized wrench on stem and turn counter clockwise. Before installing stem, make sure it is in the open position. You may need to use the handle ...

i installed stem and the valve will not shut cold water off that is running If your having major issues, I would try to locate the main on/off valves at your water heater and pump/cold water line in ...

How to reverse direction of shower stem it is a danco 9h-8h and i need to use it on right hand hot side of shower? Most of those have a quarter turn plastic pie section at the top of the stem. It ...