Questions & Answers for: Sharp remove misfeed

...copier is telling me I have a misfeed when I am certain that I do not. The misfeed paper has been removed but the misfeed notice on the screen won't go away so I can't print or copy anything else. ...

...misfeed paper but light stays on-all doors closed-any suggestions welcome-thanks Dang@fsusd.k12.ca.us When ever there is a jam be sure to try and remove the jam without tearing the paper. If you do ...

Misfeed indicator I've removed the TD cartridge and the Drum cartridge but don't see anything inside that might be causing a misfeed. The copier was copying fine, feeding paper normally and then all ...

...remove a misfeed from the RSPF, see "D: Misfeed in the RSPF" (p.83). For more information, please refer: http://www.sharpusa.com/files/cop_man_AL_1651CS.pdf Thanks click start right click my computer ...

...you Make sure that there isn't any little piece of paper caught near a sensor. Often when a jam is removed, the operator rips the paper, leaving some if it there inside. If it's near a sensor,

...misfeed has occurred. Remove the misfed paper referring to the description of "MISFEED REMOVAL". 63 SPF misfeed indicator Blinking An original misfeed has occurred in the SPF. Remove the misfed ...

misfeed light to go out This usually happens when a sensor that detected a paper jam has not reset itself after removing the paper. Make sure that when the jam was removed - all the paper came out and

...MISFEED has occurred. Remove the misfed paper referring to the the description of MISFEED REMOVAL beginning on page 65 of the pdf Manual at: ...

...feed. I set up the computer for side feed. As it fed through, it misfed. I opened the side panel, removed the entire sheet of the misfed transparency paper, and closed the door. It is still saying ...

...that is not present try opening and closing all covers that you can find. If you aggressively removed a misfeed you might have damaged a sensor that registers jams, and it might need to be ...