Questions & Answers for: GMC push button sticks

...push the button,nothing happens. Eventually it will light up and properly engage. However when it becomes time to return to 2high it seems to be the same result. Sometimes it works fine and other ...

Ad

...push the button i do i know if it works or not? does it need to be in park or neutral to ingage? You can shift into and out of 4wd hi in any gear even when vehicle is moving. You must stop and put in ...

Ad

...push button 4x4) Can i take the transmission out of a 1997 gmc sierra 5.7 liter (Not vortec) (manual shift 4x4) and stick it in my 1998? Yea as long as they are both manual transmissions everything ...

push button ) then use GM part # 12378396 if u have an automatic transfer case[[ states AUTO-4WD on push button]] recommended is to replace with gm s own --auto-trak II part# 123785078 its a synthetic

Question about 2005 Canyon

1 Answer

...plunger is'nt stuck. look at door jams wher the hinges are for a small button like switch that pushes in and out. you may have to spray a little wd40 on those so they don't stick if you find one ...

...push botton lock on door...had to do each door manually.....now when i walk up close to the vehicle with the keys the alarm goes off like i hit the panic button......once i turn off the panic horn, ...

Question about 2000 Yukon

1 Answer

...push button sticking out and closing of the door pushes it in. Generally they just snap in. If you cannot find the switch then find your fuse panel, clue to location is owners manual. There will be a ...

Question about 1999 Sonoma

1 Answer

it will be tough to release it.. calls for 2 hands to pull up and push the button at the same time..foot brake requires pushing down while pulling the hand release and see if it works.. repost please.

Question about 1999 Sonoma

1 Answer

push button on the dash. if i put it in 4x4 the light will come on but it want go into 4x4 probably sticking or faulty solenoid...have someone listen to solenoid while you push the switch...you should

push the button to go in four wheel drive it keeps blinking Make sure you are not moving to fast,but you do have to move alittle bit before in will go in, may have the a problem with the motor that is

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2004 GMC Envoy
2004 GMC Envoy

2,225 Questions

2000 GMC Jimmy
2000 GMC Jimmy

1,363 Questions

2003 GMC Envoy
2003 GMC Envoy

1,368 Questions

2002 GMC Envoy
2002 GMC Envoy

1,417 Questions

1997 GMC Jimmy
1997 GMC Jimmy

1,123 Questions

Top GMC Experts

john h

Level 3 Expert

29497 Answers

Brad Brown

Level 3 Expert

19190 Answers

Kirk Augustin
Kirk Augustin

Level 3 Expert

2020 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...