Questions & Answers for: Zebra printer line Computers & Internet

...Line. and if i have 10 lines data then it should be set height of page only 10 lines not more than that. please its Urgently how are you sending the data to the printer and what type of media are you ...

...line is somewhere else, the printer might be using a "cached" image. If your software has a feature like "Clear Cache" or "Reimage Label", you could give that a try. If this doesn't work, let me know ...

...line mode change your printer. from TLP2844 to LP2844. I had this issue last week. Turn the printer off, Press and hold the Feed button whilst turning on the printer. Keep holding the feed switch ...

...line and binds up the printer. It's like it is welding itself to the label at the line that goes across the label now. Any suggestions to what I need to replace or fix? Clean the printer head with ...

...Line 6 The printer also might not be calibrated. You need to teach the printer the size of the label. It should be set to auto calibrate when powered up. So, if you recently changed label sizes, this ...

...printer head numerous times but the lines remain. My only solution thus far has been to adjust the alignment that the lines do not cut through the bar code, but instead the lines are cutting through ...

...line up correctly, turn the printer off and back on. Hit the feed button and see if one label comes out and it is lined up on the edge of the label. If not, do the following: Printers and Faxes Right ...

...line gap on the end of the card where the printer has not printed on it. I've cleaned the printer, calibrated it, used two different computers, and two different ribbons, updated the driver. I have ...

printer in "line mode". I mean, all the ASCII characters have to be printed, In the old LP2824 printer, I switched between "line mode" and "page mode" with the feed buton

line before label print I have lp2844 printer its printing below code fine. StringBuilder sb = new StringBuilder(); sb.Append("N"); sb.AppendLine("q609"); sb.AppendLine("Q180,0"); sb.AppendLine("A50,0