Questions & Answers for: Frigidaire piercing Computers & Internet

...large enough. Supply valve must have a 1/4" opening for water to fully supply ice maker. Many self-piercing valves do not have this big of an opening. Replace water supply valve with one that has a

...I cannot afford to hire a plumber to do it. Thanks in some states you can buy whats called a line piercing valve. you simply clamp it onto your water pipe and attach your smaller copper line to it. ...

...unit not cooling how to put in freon window unit not cooling, how to put in freon You have to put a piercing valve on the sucction side because this units don't come with service port, but if you ...

...store and get a kit for connecting the icemaker. The kit has the tubing with fittings, and a piercing saddle valve you install on a COLD water line to supply cold water to the unit. If

leaking door seal the bellow or gasket may need to be replaced. this is a common problem with front loaders as the bellow can be pierced by anything that may be in or even on your clothes. I would ...

freezer no cooling and compressor continues running. low on gas has leaked check acces tube or valve or any solder joints for oil traces as this is common also check if someone has pierced inside the ...

...(mod.no. fam156r1a) 15100 btu a/c unit be recharged Hello, yes the unit can be recharged but a piercing valve must be added to the low side of the system in order to do that. The valve pierces ...

cannot find the ports Hello, most window units do not have ports to add refrigerant, you must add a piercing valve in order to add refrigerant to the unit

...a used dryer and after the first load it started with a screeching sound. Then the sound got ear piercing. Next it would start and run for a min then it would come to a screeching halt. Now it

...the connection under sink,usually the water line is tied into the cold water line there,there is a piercing valve there that you can turn to open and close.Look around for water