Questions & Answers for: Intermatic motion problems Refrigerators

Same problem, when lights are on they flicker I have just installed a new EJ500 timer and have the same problem that I had with the old one. Intermatic told me this should not happen and must be a bad

back on during the night even though not set to? your wiring is WRONG! power must be applied to the motion, dusk/dawn light at all times. switching is done via the red wire to the load

...corrosion. Most switch contacts don't merely touch when they close, but rather perform a "wiping" motion. The two surfaces "scrape" across each other to help remove any foreign debris or oxidation ...

timer doesn't turn on pump using the set point. It will turn off the pump with the set point. I have the same problem with my timer. Did you ever solve your problem, and if you did...HOW?

...sensors to control lighting, on at dusk, and plus x hours, on till dawn, and other settings. Also motion sensors are used, sometimes in tandem. BUT they require nothing after a power failure. So ...

The EH40 works just fine for 1-2 days, then all suddenly it resets itself and lost all settings and the display comes back to 12:00. I noticed the problem happens exactly when switching from OFF to ON

...motion sensitive light incompatible with the Intermatic switch? as long as the switch operates properly there should be no problem, I would delete the switch from this type of application ,some times ...

Intermatic Model T101. It keeps time. But won't turn pool equip on. The manual override option doesn't turn equip on either. Does this suggest there is a wiring problem elsewhere and not an ...

...stripped the gears. Another approach, in terms of lighting control, is use dusk to dawn or timed motion sensors. They are always "on time" where the clock needs to be changed many times over the ...

wall timer for carport lights; motion sensor lights everything ta HomeDepot and Lowes is junk, according to reviews. electricians are working in my house to update to code. Have SS5 wall timer but ...