...it out you can pull the header and see if you have any build up inside it. If you have access to a manometer you should check your gas pressures into and out of the gas valve and be sure their OK. ...
...it a bad ignitor? Other ideas? You may have low gas flow. This is tough to check but if you have a manometer you can check gas pre on the back side of the gas valve with heater off and then while it ...
Question about Ng To Lpg Conversion Kit 400 77707 1341
...of a spring tensioner to set proper pressure. You can get real technical and build your self a manometer to verify your gas pressures, this is extremely simple. If you are not comfortable
...manual will give you the pressure range you need to be in. One for NG and the other for LPG. Use a manometer to check the WC. The main reason I decided to post a second answer, is IF you used flex ...
Question about MAXITHERM 333K BTU PROPANE GAS POOL HEATER LOW NOX -
...low temperature and will not turn on low pressure will either be gas or water. technician with a manometer can check gas inlet and manifold pressure. ensure adequate water flow from pump. pressure ...
Question about Mastertemp Heater
...high? Absolutely, call somebody / a tech that knows how to test for gas pressures using a Manometer. Your Gas provider, should have a tech service
Usually answered in minutes!
19,136 Questions
12,215 Questions
7,310 Questions
7,276 Questions
5,470 Questions