Questions & Answers for: OKI load a4 Computers & Internet

Problems printing an A4 document in A3 I have a document (a table) which prints fine on the b8300 in a4 landscape. The same document, scaled to a3 won't print properly. A regular a4 document, scaled ...

OKIpage 10i does not accept A4, and wants 'Letter' My okipage 10i wants to use tray 1, which i have set up to use A4 paper. When i print a test page (from the printer controls), it works. When i print

printer a4 single sheet paper comes out creased when we print why High moisture content in paper, or fuser (ie hot bit rear) needs replacement the orange fuser pressure rollers are wrinkled or worn.

...B4300 keeps telling me to change the paper size to A4 (which would be legal size?) when I have only loaded the paper with letter size. How do I get rid of this error. I can remove the tray and reboot ...

when i select paper to a4 banner in the print driver the computer comes up with a microsoft error and shuts down the program Delete the printer and reinstall the driver, that usually works.

Two lines of faint black (colours OK) top to bottom both 35mm in from side of A4. Have changed black drum. Better for a a short time only. Fuser/corona wire probably needs cleaning. also check the ...

HOW CAN I CHANGE THE PAPER SIZE ON OKI MICROLINE 3320 I AM TRYING TO CHANGE THE PAPER SIZE AND IT DOSENT PRINT ANYTHING THAN A4 SIZE it was made for chain form papers....

put A4 in upper tray error i have oki b4545 printer, every time i try to print it print one paper and give me error ((put A4 in upper tray)) even if i put paper nothing happend plz help ... Change the

where is the print head of oki data c 711 Open the main cover. Look up inside it and there you will see the long black printhead (A4 wide) hanging down. It will have a white flat cable connecting it ...

load A5 paper although I am printing A4 and it's an A4 tray. Done loads of printing before. Done by resetting printer. I suspect you have sent the job to the MP ray and it wants you to put paper in it