Questions & Answers for: Sharp lines and streaks Computers & Internet

Sharp AM-900 I have had this for about a couple of years. Now when I make a photocopy, there is a vertical straight line down the middle of the paper that comes out on all my photocopies. Any ...

...lines on papaer when I make a copy. It sounds like the drum may need to be replaced. The streaks may be caused by sections of the drum no longer being able to hold a charge and therefore, toner will ...

narrow streak down page Using the Sharp AR-153e both as copier and printer, each page has a narrow streak down the complete page -- always in the same place on the page. I have followed manual ...

black streaks all over copy The copier prints the copy, but there are black streaks all over the paper. Have cleaned the cartridge, and first copy is better, but it gets worse for each subsequent copy

...streaks/lines (3) down center of copies only happens when document is copied through the ''feeder''. When laying flat on glass there are no streaks. I don't know what model you're using, which would ...

The received faxes have lines on them streaked on the front and back of page. We changed the toner. Is there some maintenance that needs done or something that needs to be replaced to get rid of the ...

black streaks on copy gets fine streaks on the copy output This can be anything from something on the glass to charge corona dirty, laser dirty, drum or blade or fuser rollers need to be replaced. For

streaks are only on copies and sent faxes, this indicates that your scanner is dirty. It's located where you feed your paper in. Lift this part up and you'll see a strip of glass running front to back

dark black streaks accross copies If the black lines are showing only when you are using the adf. Clean the adf slip glass with windex< the small **** of glass to the left of the copy board glass.

streak lines after doing a pm Causes could include charge plates, dust or debris on LSU glass covers or even uneven coverage of developer on the developer unit rollers. Have you cleaned your optics ...