Questions & Answers for: Sharp lamp burned out Home

Question about AL 1215 Black and White Copier

1 Answer

...displayed status code H4...... Now what ????????? Cheers, Robert.......... H4 means the fuser can't heat up. The fuser lamp probably burned out. Sorry, nothing can be done without tools and new ...

Ad

Question about XR-30X Projector

1 Answer

...lamp light indicates that there is a problem with the bulb. Mine did this when I had used the bulb past it's life and the bulb was burned out. Use the owner's manual instructions to remove the bulb ...

Ad

Question about Projector lamp Projector Lamp

1 Answer

it doing it? This never ocurred from with the original bulb? first off, make sure you got the right lamp and it's from sharp, not a "lamp store". the quality varies. it could be burning hotter than it

Question about AR-C270 Color Copier

2 Answers

H4-01. Any suggestions? The fuser temperature is low. Use sim. 5-02 to check blinking of the heater lamp. if it blinks normally check the thermistor and the harness. If it not lighted check the heater

Question about DT-100 Multimedia Projector

1 Answer

New lamp won't light After installing a new AN-100LP lamp, the fan comes on immediately, but the lamp delays turning on. The green light flashes intermittently, then the red light blinks, then both ...

Question about LC52D65U 52 in. LCD TV

2 Answers

once my lamp burns out is it replaceable I've seen lamps go bad after just few hundred hours, normally it would be just one lamp and it is replaceable. you have a very long time before that happens ...

Question about XR-10X Multimedia Projector

1 Answer

burning smell our projector is emitting a gas-like smell as if something is burning inside. Anyone have thoughts about what might be happening? The lamp is overheating some plastic fitting etc?

Question about AR-5316 Advanced Digital Imager Copier

1 Answer

...disconnection trouble - copy lamp or cpy lamp drive circuit (inverter PWB) trouble copy lamp disconnection. If lamp does not light when you power up machine, the lamp is burned out or board is

...out pure black. E means ERROR. If copies are totally black check to see if the lamp under the glass turns on & scans over your document. Odds are that the lamp is burned out and needs

...error code H4 indicate? The fuser lamp which heats the "hot" rollers is not coming on. The lamp may have burned out or the thermal fuse has blown. This machine must be 30 years old. Good luck with ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...