Questions & Answers for: KitchenAid kitchen tap Home

Valve not opening I have a Kitchenaid convection oven broil burner will come on and reach temp. but main burner gas valve will not open without a tap/hit valve was just replaced a week ago. Easy fix. ...

...Kitchen Tap The tap was purchased in B&Q. It has 2 lever taps at the side and long curve spout in between. When I turn the water on the spout springs off the connection as if the pressure was pushing ...

kitchen aid mixer leaking yellow oil is it repairable it still tu the 5 quart mixer is about 5 years old and it started leaking oil out og the area around where the beaters are inserted Can it be ...

kitchen aid--heavy duty mixer cannot release(remove) beater The beater is held in place by a pin and spring arrangement. Lift and twist the beater. If that doesn't work, the pin is trying to come out.

...Kitchen Aid KUDI01FLBL3 dishwasher is not cleaning my dishes but does get water. I've replaced the water inlet valve and checked to make sure the shut off is on. I've also checked the sprayer arm and ...

kitchen tap is good tasting, water water from the kitchen tap is good tasting, water from our new kitchen aid refer tastes bad. any ideas? The water has been in the tank for too long. Draw and discard

...side of my kitchen aid stand mixer. I cannot move it in or out. So far the mixer is working but when I tilt the head seems a little unstable. Tap it back in. . Are you sure it is not a locking

Oven will not light. If I take bottom drawer out and tap on valve components with screwdriver handle, I can hear gas release and burner ignites. Same with broiler ignition. you may have a weak ignitor

...my Kitchen Aid Stand mixer and the pin that holds the planetary in place is completely stuck. Any tips for how to get it out so I can remove the top? You simply use a punch and hammer and tap it

show to mend anything service one lever tap What lever on what model Kitchen Aid food processor are you trying to mend.