Questions & Answers for: Danco install faucet

...install. the spring goes in first then the rubber seat goes on top.put them together first on a small screwdriver,insert on hole push down on rubber into hole it should stay.replace stem in reverse ...

...faucet cartridge for an american standard bathroom sink and the package said hot/cold but when I installed it on the cold side the handle turns the wrong way. How do I reverse the operation of the ...

...FAUCET ,AND SIT ON THE VALVE BODY(SEAT) #2 THE LITTLE BLACK WASHER SIT ON TOP OF YOUR SPRING #3 PUSH THE STEMS IN THE CORRECT SIDES HOT ON LEFT.CAUTION THERE IS USUALLY NOTCHES ON THE SIDES OF THE ...

I bought a Danco 3H-10H/C, Hot/Cold stem. The problem is, it seems to be setup for hot (clockwise closes the valve, counter clockwise closes it). Is it reversable? Or is it not really a hot/cold valve

Where does the spring and rubber piece go when installing a Danco 2S-2H/C stem? http://kitchen-bath.hometownhardware.com/Faucet_parts-ssd70982-p9-l1-t1-Sv-dirasc-PP10.html

How do the 3 pieces go together for installation. The 3Z-6H/C?? thanks first off, put the spring in the faucet big end down. then put the black rubber boot seal in next and push it into place. Then ...

I bought a Danco 3H-10 H/C replacement cartridge to replace my original cold water cartridge. When installed, the water turns on when I push the handle to the off position. The water shuts off in the ...

...faucet stem how to install Shut off water supply Open faucet Remove knob Unscrew old stem Use flashlight to inspect seat for damage and corrosion. Dress or replace seat if necessary. Install new stem ...

Faucet still running Installed 3H-10H/C in Price Pfister faucet. Changed direction for cold water. To turn water completely off, faucet handle has to be in the middle, pushing it all the way back ...

...install. how are the parts put together? Turn off the water supplying the faucet. Now open the faucet. Remove handle by taking off index button and removing screw. You may need to purchase a handle ...