Questions & Answers for: Intel ide drives Computers & Internet

...drives using ide they dont power up but if i disconnect the ide ribbon and have only the power hooked in they power on. i have checked the jumper settings, changed numerous ribbons, checked for ...

Connecting an IDE HDD to a SATA port using an IDE to SATA converter Hi! I've been trying to connect a 40GB WD IDE HDD to a SATA port through an IDE to SATA converter without any success. Here are the ...

ide drives into your pc. if you have only one ide channel / connector on your motherboard then you can install only 2 ide drives into your pc. your pc might also have sata slots for devices. 1 drive /

...IDE port, both the drives do not get detected at all. I have an additional hard disk drive. Other than the Secondary IDE port (which is already occupied by the primary hard disk drive and the DVD ...

...IDE port, both the drives do not get detected at all. I have an additional hard disk drive. Other than the Secondary IDE port (which is already occupied by the primary hard disk drive and the DVD ...

...IDE port, both the drives do not get detected at all. I have an additional hard disk drive. Other than the Secondary IDE port (which is already occupied by the primary hard disk drive and the DVD ...

...drives on IDE line, Wont boot Have you tried a different IDE cable and/or an IDE port? Make sure your jumpers are set right for the IDE devices. Also if possible try the drives on another computer. ...

...IDE Hard disk drives only or SATA Hard disk drives as well? What kind of a hard disk drive should I think about for the same? Looking at the vendors I buy parts from, all the cards I saw offer both ...

...IDE devices (drives / DVD / CDROM) sata IDE devices have different "data" and "power" connectors than SATA drives. So, you need a motherboard with IDE connectors, if you wish to connect an IDE ...

...trying to connect a dvd burner to my new mobo but there is no mobo connection? how can i do this 1) IDE {PATA} DVD burner drive:For an IDE { PATA } DVD burner, connect to the 40-pin IDE header on the ...