...free code diagnoses fro m Auto Zone, ect as they say they dont have the attachment to read the codes. The last time I used the car it didnt want to start and that was a first; cloudy smoke was coming ...
...DLC , the place where you plug in the code reader ? What kind of code reader are you using ? Most of these the fuse for the Cig. lighter powers pin 16 ,check for B+ voltage with a volt meter , test ...
...code reader is no good . 012 GM Class II Communications Data Link Connector (DLC) The data link connector (DLC) contains the following serial data links: • Class II • Entertainment and Comfort ...
...code check engine light came on while driving the vehicle on dlc connector jump A and B engine soon light will flash code tree times each code and then 12 code means it is finish retrieving ...
trouble shooting codes how to retreve codes from car Jump terminals A & B on DLC under the dash & count the flashes on the dash
...DLC. If the fuse is good, check and see if the lighter works. If not, you have a bad wire. Code readers have to have power from the car. Most scanners have there own power and will read the computer, ...
Question about 1995 LeSabre
What is the fuse number for OBD port for a 2007 Buick Rendevous OBD port not working for a 2007 Buick Rendevous USA car?
pin 16 on DLC OBD2 is 12vdc. and uses a fuse. for sure.
the SM covers ...
Question about 1995 LeSabre
...code OBD1, ? 80?
the CEL lamp , DLC jumper codes PCM
or TCM transmission codes?
tell how and where you saw this.
I just looked in the SM and 79 up is transmission but 80 is ...
Question about 1995 LeSabre
...code on a 2007 Buick Rainier without a scan tool To check the engine codes on a 2007 Buick Rainier without a scan tool, you can retrieve them using the following steps: Turn the ignition to "On" (not ...
Usually answered in minutes!
19,136 Questions
12,215 Questions
7,310 Questions
7,276 Questions
5,470 Questions
