Questions & Answers for: Minolta f5 function Computers & Internet

...failure as detected by ATDC sensor.Change ATDC sensor,if problem persist,change developer(starter) and then run F8 and F5 function operation in that order.Developer change every 1000000

...to follow; 1, press "function", press "printer", "F8" press "start" machine will run about 4 minutes the start key will turn from orange to green. 2, same procedure go to F5 will run about 30

...F5.Enter in the service mode Stop key-0-Stop-1 Function menu ,place A3 sheets in the original glass place and perform F5.See the F code history and reset it.This code reset if you open and close the ...

...BOARD ... CF3 is the ATDC(automatic toner density control) sensor malfunction.Check or change the ATDC sensor located under development unit,or the PWBA master board,or perform the F8 and F5