Questions & Answers for: Dell f1 message Computers & Internet

message with press f1 to retry or f2 of course pressing f1 just gives the same error, nothing in f2 or f12 has helped, can't get f-8 to work,nothing else seems to work, can't boot bootable repair disk

...strike f1 to retry boot,f2 for set up utility. when I press f1 the same message is still coming up. Press F2 go into the BIOS, check the hard disk settings, make sure it is set to auto

...message to press F1 to reboot or Press F2 to enter the setup but it is not rebooting on pressing F1.It contains 1 ISCSI BIOS and 2 Emulex BIOS which however are disabled. Try getting BIOS access by ...

I hit F1 key and screen is black...been in phone with Dell for over 45 minutes...help I am on another pc when you hit F1 key it was on the Dell screen logo right? so after hitting the key F1 it just ...

...the motherboard and the system recognizes the cd & hd but I can't get past the message either F1 to continue or F2 set up? Go to the BIOS setting in the boot setting... deselect F1 to ...

...if these are wrong you will get the Strike F1 and F2 message. OR The BIOS battery is flat and it won't save the BIOS settings. In this case, replace the BIOS battery and configure the BIOS

message keyboard failure f1 to continue f2 to setup lol...if your keyboard fails, how are you suppose to hit the F1 or F2 key? Try a USB keyboard.

...F1 to continue) message, it could be a bad component (memory, hard drive, etc...) or the time & date is not set correctly in the BIOS, this would help a LOT thank's... Seems like you might ...

...message reads "NIC failure. Press F1 to reboot or F2 to go in to setup." The PC did not boots I have an Optiplex GX 620 Mini Tower that displays a NIC failure error at boot. The error message reads ...

message" Alert! Unsupported memory configuration.....> strike F1 to continue...etc. but when i press F1 it shows No boot device available and the window does not load up. any ideas please help. thanks