...message SMART FAILURE f1 button not reponding no other keys working!!! help Your hard drive is failing. If there is important data on the drive, stop using it and take it to someone immediately to ...
...message Resource Conflict - PCI inslot 03 Bus: 06, Device: 04, Function: 00. It als? says Press F1 to resume, F2 to Setup. Neither of these function keys resolve the problem. What do I do next before ...
...message during every start up that am imenient hard disk failure is in progress. Press F1 to continue and the windows goes on normally. Back up your data as soon as possible so when the hard disk ...
AcerPower F1 desktop boots fine after about 10 AcerPower F1 desktop boots to windows fine but after about 10 mins of operation just switches off. Does this every time with no warning or error messages
...F1 TO CONTINUE Well this error message means that the automatic drive checking software that runs all the time has detected that the drive is failing, either the electronics or the media. You need to ...
...bootup sometimes it will also be F1. You should see some message at initial bootup that says for setup hit the ____ key that will let you know. This link also tells you by manufacturer Good
...F1, nothing really happens. The message stays as it is. I started getting the message last year and actually, and when I press F1 before, it worked and continued to boot. The problem started last ...
...message to use F1 to start. Please advise You probably dislodged the "data" cable between the motherboard and the disk-drive, such that the disk-drive is inaccessible, and thus Windows cannot be ...
Question about Veriton X498G Compact 4G 500GB
why is the F1 comes on at startup on my acer x498g Is there any type of message with the F1 at startup. Normally I think F1 means to continue, so most times there is a message with it.
Question about Veriton M498G-UI5650W Desktop PC (Black) (PSVAQ03006)
...f1 to continue I'm in pc health status and don't see e reset? There is a switch on the case that is indicating it is open. You need to shut the case properly to stop getting the message or fix the ...
Usually answered in minutes!
5,470 Questions
2,719 Questions
2,468 Questions
2,231 Questions
2,165 Questions
