damper switch or wiring. A sample photo is here: http://207.234.249.73/mwd/damper.jpg It might also be a problem with the humidity sensor or a problem with the control panel, such as corrupted code or
...switch and damper motor. I replaced both myself and fixed the problem for less than $40.00. The best advice I got was replace the switch, reconnect the motor and make sure the motor runs through a ...
...damper switch is the same as the primary interlock (door) switch. If you or a friend decide to look into it, we have critical safety information, switches diagnosis and replacement, and disassembly ...
...bad? That switch is supposed to tell the computer if the damper door is open or closed. If it does not go to zero ohms, the CPU doesn't know what to do. Check the thermistor too...... just in
Question about R-1870 Convection/Microwave Oven
...this also likely to be a damper related problem? P.s; it is about 5 yrs old. If the Damper Switch loose contact will couse this problem,try to clean the contact of the damper switch and damper motor
Question about R-1870 Convection/Microwave Oven
damper Motor switch? This is a problem in one of the damper-related components, either the switch or motor or the damper door may be binding. The damper is a door inside that opens or closes depending
...switch or motor or the damper door may be binding. The damper is a door inside that opens or closes depending on cooking mode. If the controller senses that the door is not in the right position, it ...
...damper switch is the same as the primary interlock (door) switch. Its location varies by model, but you'll have to take the outer cover off to find it. The best place to order Sharp parts is ...
...damper assembly. If a switch is all you need, we offer a universal type for only $7.50 postpaid which you can order here.We're happy to help you with free advice and we'd appreciate ...
Question about R-9H66 Microwave Oven
...after it is heated. Microwave still works fine. Appreciate any suggestions. If the Damper Switch loose contact will couse this problem,try to clean the contact of the damper switch and damper motor
Usually answered in minutes!
275 Questions
130 Questions
117 Questions
86 Questions
95 Questions
