Questions & Answers for: Saturn what is a cube tool Computers & Internet

Question about 2001 L-Series

2 Answers

hours to replace the engine? a 2001 l series engine about how many hours would it take with the right tools? with the right tools and a lift, and one helper 4 hrs from start to finish With the right ...

Ad

Question about 2001 L-Series

1 Answer

how to replace leaking water pump on 2002 saturn lw200? well if your talking about the 4 cylinder 2.2 liter,,youre gonna need a special tool that saturn has,its a holding fixture tool for the timing ...

Ad

what tools do i need to get turn signal switch out what tools do i need to get the turn signal switch out of the steering column of a 2000 saturn Impact gun. Steering wheel puller lock plate removal ...

Question about 1994 Sl

1 Answer

...stamped on it then you will need a special tool that looks like a boxed cube with tips on it, these are sold at an auto parts dealer, as with this model it screws in not pushed in. Hope this helped ...

WATERPUMP IS LEAKING AND MAKING NOISE. CAN I REPLACE MYSELF. Hello: If you have a 4 cylinder engine you will need the special tool to hold the drive gear for the water pump. If you don't you the ...

how do u remove the metal clips on what i would guess is the factory fuel filter A special fuel line clip release tool is required. See a local NAPA auto parts for the tool The clips are either ...

When replacing plastic drain plug from 1996 Saturn SL2 radiator; does this unscrew and screw back in? Do I need special tool? seems to leak from this position;I've had the mechanic tighten the plug. ...

How do I program keyless remote? You'll need to take to a GM dealer ! The scan tool must stay connected until all of the transmitters are programmed. Install a scan tool. Turn ON the ignition with the

2009 saturn aura hard steering I was told that the steering motor moduel was bad so I replaced it still hard to steere what could it be Who told you , was it checked for DTC'S - diagnostic trouble ...

I have a 2003 Saturn L200 how do I program keyless entry remote using a scan tool AutoLink AL319 Sorry but you'll need a better scan tool , not a code reader . Factory scan tool .

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...