Questions & Answers for: Shuttle cpu frequency Computers & Internet

Question about AV40S Motherboard

4 Answers

No boot...no nothing...I am screwed I am having a huge problem... I took the heatsink off of my CPU in order to replace it and while it was off, I was on the ground to look inside the case and my foot

Ad

Question about AV42 Motherboard

1 Answer

...I did Remove cooling fan from motherboard to clean it from dust... Thank You! the portion between CPU and CPU sink must be clean, to work well for CPU cooling. So remove the fan gently and clean

Ad

no video with p4 cpu specs 2.8ghz 533 fsb 1gb L2 cache Prescott I put the cpu in my motherboard, turn on the system, the power comes up but no video comes up on my monitor, normally I have a celeron ...

Question about MK40VN Motherboard

1 Answer

CPU to its correct frequency. AMD XP 2400+ frequency Bus speed (MHz) = 266 Clock multiplier = 15 You can try turning on the over clocking, see the manual page 57. These setting would be normal for the

Question about AV42 Motherboard

2 Answers

...frequency for the board or processor. Research the new processor to find out the memory class and then see if it matches the memory in your machine. If it doesn't then the processor won't work. If it ...

Question about AN35N Motherboard

1 Answer

...Any suggestions. Waldo Hi there Try One of the following steps: Flash Youre MB BIOS. make sure that CPU Fan is working OK. Is the CPU attached to the MB correctlly. Is the CPU Fan base and scrowse ...

Question about AK31 V3.1 (AK31A) Motherboard

3 Answers

...results in a beep code lasting approx 5 sec and repeats every 5 sec. No video. Sounds like a cpu fail what i call a epic fail n tech terms epic fail means in mid operation when the cpu get at ...

...frequency so I went to the BIOS to set it right, did so and rebooted, and the prosessor stil wouldn't run right. After some thought I changed the BIOS battery, went to the BIOS, resat all settings, ...

Question about MV43N Motherboard

1 Answer

mv43 v3.1 can it work with Intel Pentium 3.0 CPU This motherboard supports socket 478 cpu. This would mean it only supports Pentium 4. The Pentium 3 is compatible for a socket 370 motherboard. So you ...

Question about XPC Glamor SG31G2 (SG31-G2-BK-V2) Barebone

1 Answer

...up when booting. Both the blue and yellow activity light remain solid and the heat sync next to the cpu seems to get very hot. I have removed all peripherals, pci card and reseated ram and small ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...