Questions & Answers for: NEC MultiSync computing drawback

No power to monitor My pc was on and working fine when the monitor just turned off. I checked the power cable and the plug fuse had blown. I replaced the power cable but now the monitor won't turn on.

monitor not working when computer is powered on the monitor keeps showing the red blue and green box saying self test and just keeps popping up on the screen and monitor will not come on. These ...

green light is flashing and screen won't come on Try another monitor on that computer and see if it boots up with video. If you still get the same problem then that means there is something wrong with

the base of my monitor is broken where the screw from monitor attaches to base to hold monitor upwirght plastic broken off mickey mouse see up can I order a new base? yes you can order a new base, try

my computer monitor keeps going to standby There are 3 possible causes 1. cables are not connected properly 2. computer is not turned on 3. computer is not working, its not starting up, and the issue ...

The screen is blank when I hook up my computer to my monitor but the computer notifies me a monitor has been added. The green power button on my monitor is slowly blinking green. explain in details ...

when i turn on my monitor i waitting about 10minutes to see the panel on. why? thanks The most likely problem would be starting the cold-cathode backlight tubes- which are basically flourescent bulbs.

screen is dark on bootup Have you plug in your computer to another monitor and see is not your computer that might have damage while it boots up?

My monitor suddenly went black when I awoke it from standby and it only states "video input 1 D - SUB NO SIGNAL" each time I turn the moniitor off an on again. I checked all connectivity to ...

what to do when your monater says no signal analog WARNING: Before you start troubleshooting remember that you are dealing with electricity that can KILL. ...