Questions & Answers for: Polycom codec software Audio Players & Recorders

Registration Failed Polycom Wireless Sound Station says registration failed. I have two units both with the same problem. We have tried to reregister with same results. I solved this issue with our ...

Registration Failed Hi guys i have the same problem as the others. all was wrking fine but all of a sudden it says registration failed. any ideas on how to fix this? Hello Risas, This is a known issue

...is Admin with password of the 14-digit serial number More than likely you'll have to flash the codec to factory default and then the password should be the codec serial

Polycom soundstation 2w has no signal. tel line is good, power to transmitter is good. Soundstation seems ok, can get to menu & settings ok. Hello Edward, This is a known issue with this product ...

I need viewstation software! I have a system that has 3.x software, but I need to install 7.2.. where can i get 5.0 or a middle step software?? polycom does not show it on their website anymore. I ...

move camera 35 feet from codec and codex cannot detect camera and cannot move camera, however camera works??? an external power supply needs to be used when going that far from CODEC try using CAT 5/6

when we have 3 connections, we don't have problem, but we arrives the 4th connection, one of the others camera become blue is it same location or camera that turns blue have you tried lowering the ...

..... The former 30 foot is the specific cable from codec to mic. If changing this fails and you tested the mic, then your unit is either suffering corrupted software or the mic hardware is damaged. ...

Polycom IP 501 won't reset to default when using MAC address as password I've tried to reset the default on the Polycom 501 and it won't allow me to use the MAC address as the ...

Polycom Telepresence m100 - License Yes you can. Polycom Telepresence m100 https://support.polycom.com > personal-telepresence Product Name Product Name & Notes, Software Download, Release Notes, ...