Questions & Answers for: Rainbow clogged nozzle Heating & Cooling

weak suction on rainbow se vacuum suction is weak. checked belt, fine. took brush apart and cleaned. brush seems to be rotating normally. Check for clogs in the nozzle air passages (remove bottom ...

Rainbow vacuum-water not spinning when i on my rainbow vacuum, the water is not spinning. suction seems to be still working, still picking up things, but the water doesn't move, the air is merely ...

clogged? If your Rainbow has lost performance, first two areas to check. Belt in the power nozzle... Belt for Power Nozzle EXCEPT the PN 12 HEPA Filter (Not applicable in any Dxx model Rainbows.) HEPA

...clogged with pine needles. The carpet head is not picking up. How do I open it to clean it out? Make sure you have suction at the end of the hose. If not, the clog is most likely in the hose. Detach ...

I have a model DC3 rainbow thar has lost suction. what can i do to fix it It runs fine but no suction It worked reaaly ood until today and no suction any suggestion? Check suction at intake without ...

...clogged. <a href="http://www.rainvac.com/rainbow-vacuum-schematics"></a>Check the suction on the main unit without any hoses connected. If that seems good, then connect a hose and check ...

Why is my rainbow d4c kicking out so much dust? Have tried replacing/refreshing water more often. Tried cleaning as many parts as I could. what else can I do? I kicks out almost as must dust and dirt ...

nozzle is not working and the belt seems to be in place. The motor is running fine and I can use other attachments There are a few problems with this head which we frequently encounter. One, the motor

Power nozzle PN2 smells like it's burning The belts was replaced. Burning smell. Roller spin but doesn't seem to pick up. check for a clog in the hose...most likely down by the hose/power nozzle ...