Cant get local channels I am using an outside antenna but for some reason this set wont pick up or cant tune in channels 40, 31 58, and 03. I have only had the set a few days could it be that it was ...
Channel memory reset I have a Sharp TV for which I have "hidden" certain channels, so that when you scroll through the channels, some are skipped. I have since lost the remote, but I have an old VCR ...
the vcr's channels. set it up to use cable not air. when the vcr was unlugged it lost it's channel memory. don't buy new cables, you're getting a picture and sound so that means your rca cables are ok
...channel setup, presetting or Auto/Manual Searching, saving to memory. The problem I see is that other Channels have been deleted from Memory, i.e no other program channels are saved in memory. If you ...
Question about Aquos LC-46D62U 46 in. LCD HDTV
...channel when turned back on. If you have the tv plugged into the cable box, when the box is shut off it basically unplugs your tv and the tvs memory is reset. The tv should be plugged in to its own ...
Question about Aquos LC-32G4U 32 in. HD-Ready LCD Television
...in transmission". It was showing many channels before. Did I inadvertenly press a button on the remote to effect this? The best thing to try is to allow the TV to re-autoprgram its channel
...screen. You probably need to do a channel scan to find TV channels and progrma them to the TV memory. Using your remote control select Menu mutton and follow instructions for "auto channel
...memory or restore default or a similar command) . Do the reset and exit the menus (save the action on most TVs); then return and rescan the OTA channels. On a different brand of TV this worked. The ...
Question about LC-22L50M-BK 22" Multi-System LCD HDTV. World Wide NTSC M/
...changes back to tv channel. Check and replace it main system control memory IC & all micro-switches at its front panel control board. Contact any service technician. Gopakumar Gopalan ...
Question about Aquos LC-46D62U 46 in. LCD HDTV
...into memory. After it has started, do not stop it until it says on the screen that is finished. If you stoop it before it has completed the scan, the TV will keep its original program. (one
Usually answered in minutes!
203 Questions
45 Questions
25 Questions
19 Questions
30 Questions