bobbin case problems with machine, model 9110 sewing machine I cannot seem to get the bobbin thread up (there are supposed to be two threads on the outside). Instead the thread on the needle gets ...
5932 knotting every other inch I am trying to sew on a model #5932 and the thread is knotting on the underside as I sew. This problem arbitrarily gets worse and better. The top of the stitch looks ...
bobbin case pops out wehen sewing. my singer sewing machine, the bobbin case keeps poping out when i'm sewing, i adjusted well the thread. but its the case the is giving me problem. The case probably ...
Question about CE-100 Futura Computerized Sewing Machine
bobbin case is popping out, and machine is birdnesting My Singer futura ce 250 is birdnesting badly during embroidery, the bobbin case is popping out of it's drive I'm assuming it's a timing problem ...
Question about CE-100 Futura Computerized Sewing Machine
singer 328k bobbin winder replacement need diagram or help on installing singer sewing machine 328k bobbin winder Follow these instructions, undo the 2 screws on the right hand side plate where the ...
needle hits the wheel under bobbin My needle is hitting the wheel underneath the bobbin. It's as though the wheel is not turning in time with the needle lowering. Before I realized what was ...
Question about CG590 Mechanical Sewing Machine
Why won't my old manual singer sewing machine needle move? The wheel turns, the gear that turns bobbin winder works but the needle will not move up and down. 1. Disengage the bobbin winder.That is ...
Question about CG590 Mechanical Sewing Machine
how to loosen stop motion wheel on singer 500 slant-o-matic sewing machine Remove the screw on the clutch wheel. Carefully pull off the wheel, and check the ring. The tabs should be facing outward. If
Question about CG590 Mechanical Sewing Machine
How to deactivate the safety device on the Singer Futura SES 1000 embroidery machine? How can I get the hand wheel to turn again to get the machine to sew/embroider? Amidst embroidering a towel the ...
Question about CG590 Mechanical Sewing Machine
I can't move the stitch width wheel on my Singer 534. Any ideas or does it need service If you can't move the stitch width wheel on your Singer 534, there are a few things you can check: Make sure the
Usually answered in minutes!
16 Questions
8 Questions
4 Questions
2 Questions
1 Questions
