Question about D50 Digital Camera with 18-55mm Lens
...image does not look as if it is horizontally balanced in the middle. It slants to a side, or it looks slanted. This same problem occurs when I take pictures of objects and there are vertical straight ...
Question about COOLPIX S6 Digital Camera
...can see the previous pictures. Hi, the error could be due to several things - the card reader, pins bent, card getting hot or near magnetic source... go ahead and re-format your card, even though u ...
Question about FM10 35mm SLR Camera
image focuser change and indicate focus. I and the others tested focus on a newspaper front page as well as each others faces. Any idea what is wrong and is it repairable? I have seen bent mirrors and
...image is caused by the most common killer-fault on almost all binoculars: the yoke assembly which the eyepieces is mounted on has either bent or broken. The only fix is to replace the yoke assembly: ...
...image This may be related to the CF card being used. The Nikon D70 and D70s are an older technology and supports most cards up to 1 GB in capacity. It can support a very limited number of cards up to ...
...image in the view finder. Hi dear pmorala 1) check the lens if to drive the diaphragm actuating lever that opens. 2) also check the aperture lever on the camera body may be broken or bent. 3) look at ...
A somewhat less common problem is that the contact pins in the camera's CF card compartment are bent, in which case you would need to bring the camera in for service
...image. It gets worse as you zoom in to the maximum setting. I have tried adjusting all possible focus, dioptre and viewing settings, but there is a definite problem. Has anyone else had this from a ...
Question about D90 Body Only Digital Camera
...image does not appear on media card if picture is taken, but you can view other recorded images. Check to make sure that the little sliding part on the side is not set on protect, so that you can't ...
...These lenses are mostly made out of plastic pieces. There is probably something broken and/or bent. Lenses are manufactured with extremely great care. When a lens element is only a millimetre
Usually answered in minutes!
4 Questions
2 Questions
1 Questions
