...3.Thread twisted on guide post========" 4.Thread twisted out of tension=======" 5.Take up spring bent or broken=======Check action of spring 6.Thread jumped off pull off finger===Check threading ...
...Thanks I had a sewing machine that the thread would jump off the thread guide & it had to be bent just a little with small plyers to keep the thread from jumping off constantly hope this ...
...hole to determine what it is hitting. I've seen (in severe abuse cases) that the needle shaft is bent and the needle hits the bobbin case, instead of just coming down next to it. Use a plyer to ...
You may have the tension too tight and the thread may be breaking? Your hook in the shuttle may be bent ( the reason for the needle not taking up the thread from the bobbin? Needle may be bent? Try a
...3.Thread twisted on guide post========" 4.Thread twisted out of tension=======" 5.Take up spring bent or broken=======Check action of spring 6.Thread jumped off pull off finger===Check threading ...
...-or possibly your needle is
...needle thread is not threaded properly 2. The needle thread tension is to tight 3. The needle is bent or blunt 4. The needle is incorrectly inserted 5. The needle thread & the bobbin thread
Question about 226R-1
leather Was the bobbin filled as necessary? Was it inserted correctly? Was the needle misaligned or bent
Question about 255RB-3 Mechanical Sewing Machine
...by debris in the rotary hook or the bobbin case has been hit by the needle and has cracked/and or bent it. Make sure it is snapping into place correctly. 2. The rotary hook is out of time. Reset
Question about 255RB-3 Mechanical Sewing Machine
...advance. Tried to tighten the bobin tension screw. THE SPRING THAT TIGHTENS AGAINST THE THREAD IS BENT OUTWARDS. IT MUST BE BENT INWARDS BY KEEPING THE TIP HELD UP WHILE YOU PUSH DOWN ON THE SPRING ...
Usually answered in minutes!
19,136 Questions
12,215 Questions
7,310 Questions
7,276 Questions
5,470 Questions
