Questions & Answers for: Volfenhag bass knobs

...to get a decent sound of the system. The sound comes out extremely muffled and besides that, the bass is controlled from the remote knob (not the radio where you would turn the volume up and the ...

...Frequency 40 - 250 Hz Subsonic Filter N/A Signal-to-Noise Ratio N/A Channel Separation N/A Bass Boost 0 - 18 dB Bass/Gain Remote Yes Fan Cooled Yes Fuse Rating 20A x ...

do u here the speakers if u do and u have to let go off the cone and you dont hear noting just some bass im tinking ur subs are burn out(they dont work

need remote bass control check ebay.....

i have a volfenhag zx-8400 amp. i dont have a manual. whats the proper way of conecting amp? its mounted on my speaker box, which is ported, 12' volfenhag 2500 watts. on the side of amp it had voltage

...knobs, such as the bass knob to the lowest setting. From there, test your subs for soujnd, and then change the gain and amount of bass for the sound you desire, since each person is different. I have ...

...box and should I get a bigger vented port box because they seem not to be producing the amount of bass I know they can put out Ensure the audio system is capable of delivering output power required ...

...I use These subwoofers are designed for Sealed OR Ported applications. If you are looking for BASS - and not concerned about sound quality - a 1.0-1.5cu ft (ea) enclosure is ideal. For tighter

Lights are on but no bass is being played, went out after it got hot. Blown High output resistors. Definately repairable. Good luck. If you can solder, try removing the high output resistors, replace ...

does the remote bass control have to be hooked up on a volfenhag zx-8100 for it to work lights come on fan works but no sound No, it's only use to control the gain or level from zero to what u set it ...