Questions & Answers for: Technics ball tap Computers & Internet

...anti-Skate is not working. It really rips back alot. Please Help Daniel You most likely have broken balls,,, lol yes balls bearings are most likely broke you might have to replace your arm.. about ...

...which means they have a cone shaped tip on them. That cone shaped section sits on 4 very small ball bearings which balance the tonearm. There is a very thin piece of sheet metal which protects ...

Technics 1210 feedback/grounding problem at mid to high volumes when the needle is on the record and u touch or tap the deck u can hear the tap or touch coming through the speakers, have tried several

1210 problem The problem occurs on both decks. At mid to high volume when the needle is on the record if i touch or tap anywhere on the deck u hear the tap thru the speakers . At high volume im ...

...plz rate my help, and if you need more help just let me know! electech More than likely this metal ball is the one that is used with the on/off

Thump or thud coming from speakers when turntable is tapped Recently I noticed a thump or thud coming from my speakers when the needle is on the record. I have two tables and it happens with both of ...

...To do this you will need to remove the base of the deck - be carefull not to lose the spring and ballbearing. ...

pleurage Wow and fluttering always present. Also when using completely new cassettes. juan Clean your capstan as well as your tape head with cotton balls slighly damp in rubbing alcohol

how to remove the platter? LIFT THE PLATTER ON OPPOSITE SIDES ABOUT 10-20MM THEN TAP THE CENTRE SPINDLE,EASIER WITH 2 PAIRS OR HANDS.

technics sl d20 How do I take off the platter Hi, the platter on these can stick a little sometimes. Whist applying upward pressure to the platter tap the center spindle with a screwdiver handle and ...