Questions & Answers for: Toto ball tap Home

...It should drip for a while. If it is continuously dripping there could be dirt or deposits on the ball **** valve. Shut off the water and dissasemble to see if there is deposits or perhaps a torn ...

How do i reset the level on the fill valve? Either by the chain, or bend the rod that has the float ball which is the most common and efficient way.

...with your flapper not seating all the way so the water is not filling in the tank to lift the ball **** to shut off the water first make sure the flapper is ...

I read that the water in the tank should be 1/2 " below the overflow tube. Adjust the float on the ball **** to shut the water off at a lower level in the tank

toilet flushes fine but when the tank has filled it seems like the float ball keeps bobbing up and down letting more water or air into the tank. it will do this 5/6 times then quits. its almost like ...

...approach is best - adjust and flush repeatedly until the bowl emoties completely. If it uses a ball float, there is an adjustment on the float arm as well. Another scenario with a toilet with a ...

...tap off. Anytime that you have water dripping between flush cycles, it is caused by water leaking through the flush valve. Without being able to look at it I would recommend placing the entire flush ...

how to stop running water in tank Replace the "Ball ****" ...it is non-repairable...it is the part that regulates the water level in the toilet tank...also check the "Flapper Valve", if it is worn it ...

I have a one piece toto toilet that just started to have a flush problem. I replaced the flapper ball with a toto replacement ball, but when the flush handle is pushed, the toilet bowl does not empty ...

...know if it just needs new flapper or what is wrong. Anyone have a similar problem? valve ball