excessive static on AM stations. Waves in and out. Not so on car radio. Is there an antenna to eliminate this? Turn on the radio and turn the AM/SW BAND switch to the AM position. MW appears in the ...
Grundig Satellit 800 display problem I have a Grundig Satellit 800 receiver that is perfect working order except that the display is squirrely. It never displays correclty. When the tuning knob is ...
...(check the earphone jack, too... 'cause it is in the circuit) or The bounce cause the Audio amplifier IC to become desoldered from the
Do not receive at SW3.Frequency is changed when tuning knob is rotating,but noone station! The band switch does not make a proper connection at SW3. Replaced,and OK. Best regards! Your sp-bill.
Question about Satellit 800 AM/FM/SW Radio
Grundig Satellit 800 LCD display doesn't work correctly Hi, I have a Grundig Satellit 800 radio and the LCD display is unintelligible. When I turn the tuning knob the display changes but is still ...
S350 won't stop scanning on AM/MW mode. Tech support said reset with paper clip but that won't stop it either. Any thoughts? John G. Warren john.g.warren@jci.com Strange. How can it, since that Radio ...
the string came off that runs the turner to change station do u have a picture of how the string is strung? The main knob has exactly three turns on it
grundig r2001 radio error 3 cant sort it after flat batt The picture shows an S350 -- if your model looks like that but with a different designation this fix may still work: Look above the gain knob ...
Missing grundig 650 Tuning knob The knob is missing the inner part Go to www.ebay.com type make and model of radio, and scroll through the list, you might find what you are looking for.
Used it for a few weeks and now the tuning on AM and shortwave has gone completely flaky. When slowly tuning up on the SW2 band, it will jump right over from 11000kHz to the 13000's and will sometimes
Usually answered in minutes!
227 Questions
165 Questions
160 Questions
104 Questions
