Questions & Answers for: Cadillac DeVille amp knobs

THE LIGHTS STAY ON IN MY CADILLAC DEVILLE WHEN I TURN MY CAR OFF Under the light switch knob, there is a sliding switch. Moving it to off will make the lights turn off as soon as you push the knob in.

Ad

amp; InstallationRemove the radio knobs and anti-rattle springs. Remove the two hex nuts securing the bezel to the radio. Remove the two center air conditioning outlet grilles. Remove the one screw in

Ad

Question about 1997 DeVille

2 Answers

...bulb cause it could be as simple as that. If they are OK then the switch has to be checked & power to the bulbs Had a similar problem on a american car like this and i had to order then ...

courtesy lights and cigar lighters are not working, I have checked fuses and they are all good. 97 cadillac deville the BCM controls the lights, the cigar lighter will burn out at anytime so replace ...

2000 cadillac deville remove door panel 2000-2001 Deville Door Panel Removal: 1. Position window fully downward and ensure manual lock knob is in unlock position. 2. Disconnect locking clip at front ...

Question about 1998 DeVille

1 Answer

interior lights wont go off Check that the light knob isn't turned too far to the right to activate the interior lights.

Question about 1999 DeVille

1 Answer

dash board cluster do not light up Please locate the dimmer module. I attached a picture below. Carefully turn the round knob from left to right. Move the knob from the extreme left to right few times

the driver side heater works great but the passenger blows out cold air it has the knob on the passenger door for cold and hot but it dont work either does your vehicle have dual climate control? if ...

Which are the fuses for the break lights on the 2002 caddilac devile see the diagram. and test, the fuses that goes below the knob of braker small gate,has indication for each light. God bless you

Question about 2001 DeVille

0 Answer

remove the left door panel Ensure the manual lock knob ( is in the unlock position. Insert a flat bladed tool into the top service notch in order to disengage the locking clip  located at the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...